Skip to product information
1 of 2

(BOOST CONTROLLER GAUGE) AEM X-Series Tru-Boost Controller Gauge w/ Boost Control Solenoid 80PSIg Internal MAP Sensor

aem30-0352

(BOOST CONTROLLER GAUGE) AEM X-Series Tru-Boost Controller Gauge w/ Boost Control Solenoid 80PSIg Internal MAP Sensor

Regular price $358.95 USD
Regular price Sale price $358.95 USD
Sale Sold out

The Tru-BoostX Boost Controller Gauge delivers all of the features you loved about the original only now with AEMnet for data logging and a big, fat internal MAP sensor that can handle boost pressures up to 80 PSI of boost. The King is dead, long live the King! The Tru-BoostX Boost Controller gauge delivers digital accuracy but with the simplicity of a manual boost controller. All programming is done using the faceplate buttons and no laptop is required. AEM’s specially designed Boost Control Solenoid and all necessary hardware is included. *Program Two Boost Levels + Scramble Boost Setting* - Program two boost modes for different levels of performance (up to 80PSIg internal MAP sensor), and program a time-based scramble boost setting that is controlled using a switched input. You can also turn off the controller and use the gauge as a display. *Change Wastegate Open Pressure* - Ideal for reducing boost spikes and improving spool up. *Display Boost Levels in PSIg (PSI), BAR or kPa (PAS)* - See your boost in the units you prefer, and scale the 24 outer LEDs to match your peak boost levels for the perfect sweeping motion. *Set Alarms and Display Peak Boost* - Set the 24 green outer LEDs to flash based on boost pressure so you are alerted to an overboost condition. A ground output is included for triggering an optional LED warning light. Select the “B” button to see peak boost level and clear the value using the menu. *Overboost Protection Built In* - Protects your engine from an overboost condition by shutting the boost control solenoid off until it is reactivated by you through the buttons on the faceplate. *Integrated Error Protection* - Alerts you to a fault if the boost control solenoid is shorted or disconnected so you are never left guessing whether the Tru-BoostX is operational. *Datalog using AEMnet CAN bus* - Outputting channels over AEMnet provides so much more than just boost pressure! Send 13 channels of data over a 2-wire connection, including boost pressure, peak boost, boost target, boost scramble duty, overboost status, wastegate crack pressure, boost control solenoid status and more. *Tru-BoostX Gauge Features:* * A boost display gauge and boost controller in one! * Easy to program – no laptop required * Boost control solenoid and all necessary hardware included * On-board 80PSIg MAP sensor—no upgrade kit needed for high boost vehicles * Two boost level settings and scramble boost setting * Wastegate open pressure setting for controlling boost spikes and faster spool * Display boost levels in PSI, BAR or kPa * Overboost protection and programmable alarms, ground output for optional LED warning light * Peak boost level recall * X-Series design for the best visibility (87% larger center LED and 33% larger face design) * X-Series dimensions make it easier to install (0.825” overall depth, 0.20” cup depth) * AEMnet CAN bus enabled for data logging (13 channels of data over 2-wire connection) * Standard 52mm (2-1/16”) cup * 24 programmable green outer LEDs * Auto dimming sensor for ideal brightness day or night * Positive locking connectors * Optional silver bezel with white faceplate accessory kit (30-0352-ACC)


Features and Benefits

  • Slim 0.825" overall gauge depth and 0.200" cup depth - mount them virtually anywhere!
  • 2-1/16th (52mm) gauge diameter for easy mounting in gauge pods
  • Programmable center LED is 87% larger than original AEM gauges
  • 24 green outer LEDs for quick reference to engine parameter
  • A boost display gauge and boost controller in one!
  • Easy to program - no laptop required
  • On-board 80PSIg MAP sensor-no upgrade kit needed for high boost vehicles
  • Two boost level settings and scramble boost setting
  • AEMnet CANbus-enabled for transmitting data to EMS or Data Logger
  • Wastegate open pressure setting for controlling boost spikes and faster spool
  • Display boost levels in PSI, BAR or kPa
  • Overboost protection and programmable alarms, ground output for optional LED warning light
View full details